Pool Maintenance
HTH CLARISHOCK
Liquid
1 L
CLARIFIES WATER BY AGGOMERATING MICROSCOPIC PARTICLES AT FILTER LEVEL
Super active clarifying formula for sand filters.
Enables the filter to stop and eliminate particles by backwashing the filter.
Characteristics
- Non-foaming at the recommended pool dosage
- Very pronounced clarifying effect
- No aluminium
- Can be used with the filter in operation
Warning! HTH CLARISHOCK should never be used with diatomaceous earth, cartridge or filter bag filters.
Dosage
20 ml of product for 10 m³ of water
- Compatible with salt chlorination.
- Make sure the filtration is on.
- Spread the product in the pool in front of the inlets (if there are any).
- Immediately after backwashing the filter (s).
- Every week, use 20 ml of product for 10 m³ of water to be clarified.
- Regularly check that the pressure of the filter remains within the authorized limits because the agglomerating action of the product may cause the pressure to rise faster than usual. If this happens, stop the filtration, backwash followed by rinsing the filter.
Certification
no_haz:No hazard pictogram, no signal word, no hazard statement(s), no precautionary statement(s) required.
Caution!
Keep this product in a dry, well ventilated place, at an average daily temperature not exceeding 35°C.
Never pour the product on the surface of the water in the presence of bathers.
The optimal use-by date and the batch number appear on the packaging.
DO NOT MIX WITH ANY OTHER PRODUCTS. DO NOT DILUTE BEFORE USE.