Pool Maintenance
HTH STABILIZER
Granules
3 kg
STABILISES THE CHLORINE AGAINST THE DESTRUCTIVE ACTION OF UV RAYS
Ideal for use with HTH’s red range of calcium hypochlorite (stabilizer-free chlorine).
Helps chlorine last longer.
Characteristics
- Slow dissolving granules without residue
- 100% active ingredient content
- Improves the maintenance of chlorine content in water
- Suitable for all types of water (even very hard water)
Dosage
To increase the level of isocyanuric acid by 10 mg/L, use around 100 g of product for 10 m³ of water
LE SAVIEZ-VOUS ?
It is recommended to maintain the amount of stabilizer in the water between 30 and 50 mg/L
- Compatible with salt chlorination.
- Make sure the filtration system is running.
- Sprinkle the product directly into the pool onto the largest surface, in front of the inlets if there are any (take into account the direction of the wind to avoid the product entering the eyes).
- To increase the isocyanuric acid content by 10 mg/l, use approximately 100 grams of product per 10 m³ of water.
- Subsequently, add the product regularly, depending on the intake of fresh water, respecting the same proportion of 100 g per 10 m³ of water added.
- This product may take time to dissolve, but there is no risk to pool surfaces.
Certification
no_haz:No hazard pictogram, no signal word, no hazard statement(s), no precautionary statement(s) required.
Caution!
Keep this product in a dry, well ventilated place, at an average daily temperature not exceeding 35°C.
Never pour the product on the surface of the water in the presence of bathers.
Never pour water onto this product as it may react violently if it enters into contact with small volumes of water.
If a measuring cup is provided, use it to dose the product but not for anything else. Replace the measuring cup, when dried, in the bucket.
The optimal use-by date and the batch number appear on the packaging.
DO NOT MIX WITH ANY OTHER PRODUCT. NEVER DISSOLVE BEFORE USE.