HTH EASIFLO™ BRIQUETTE™
7 g tablets
45 kg
MAINTAINS CHLORINE LEVELS TO ENSURE DISINFECTION AND CRYSTAL CLEAR WATER
The briquettes developed for use with the HTH EASIFLO feeder save up to 10% chlorine compared to ordinary tablets and granules.
Combined with HTH EASIFLO system, they give you the assurance of perfect pool disinfection, with ease.
The combination of HTH EASIFLO feeders and briquettes produces a constant chlorinated solution (between 1.2% and 2% at 1 bar, depending on the model) to maintain precise chlorine levels in the pool.
This ensures the destruction of algae, viruses and bacteria, including Legionella.
The water is clearer, healthier and more comfortable for swimmers.
Characteristics
- 7 g briquette in a convenient pail with handle and dosing tool
- Fast dissolving
- Disinfectant action
- Anti-scale action
- Algaecide action
- Average chlorine equivalent content of 68% on the date of manufacture
- Minimum chlorine equivalent content of 65% on the date of manufacture
- Minimised insoluble production (less than or equal to 4% in distilled water)
- Formulation containing a chlorine-stable anti-scale agent
- Free from isocyanuric acid (stabiliser)
- Can be used in hard water (high T.H.)
- Compatible with all filtration equipment
- Minimised degassing during storage compared to isocyanurates
- When stored correctly in a cool, dry place with the lid closed, the product has a very good shelf life
No risk of over-stabilisation, therefore no need to drain or replace the water during the season
Dosage
- 700 g per 100 m³ of water per day for indoor pools
- 1 kg per 100 m³ of water per day for stabilized outdoor pools
- 1.5 kg per 100 m³ of water per day for non-stabilized outdoor pools
LE SAVIEZ-VOUS ?
HTH is the inventor of the manufacturing process of calcium hypochlorite
USE BIOCIDAL PRODUCTS WITH CARE. BEFORE USING THE PRODUCT, BE SURE THAT YOU HAVE FULLY READ THE INFORMATION AND INSTRUCTIONS ON THE LABEL.
INSTRUCTIONS FOR PREPARING CHLORINE SOLUTIONS
If the concentrated chlorine solution is prepared manually, the following procedure must be strictly followed:
- Always use a clean preparation container that should only be used to prepare chlorine solutions.
- Calculate the amounts of water and calcium hypochlorite needed to achieve the desired chlorine concentration (see the table below).
- Add at least 90% of the required amount of water (see table below) to the container.
- Slowly add the required amount of calcium hypochlorite to the water while agitating the solution.
- Add the remainder of the required water to bring the total volume to the desired level.
- Continue agitating for at least 15 minutes to ensure that the product is completely dissolved.
- Do not allow anyone to enter the pool if the concentration of available chlorine is above the national limits, or in the absence of this, 3 mg/l for swimming pools and 4 mg/l for spas.
- For perfectly balanced water, maintain alkalinity (T.A.C.) at a level between 60 and 120 mg/l.
- In an open-air pool, maintain stabiliser concentration between 25 and 50 mg/l.
- Check the chlorine level in pools regularly because UV rays can partially degrade the chlorine.
- Adjust the pH between 7.0 and 7.4.
- Check that the filter is in operation.
- Permanent chlorination:
- Check that the preparation tank and the pump do not contain any stabilised chlorine (trichloroisocyanuric acid or sodium dichloroisocyanuratee: check the labels).
- Add the briquettes to an Easiflo® feeder or alternative type of suitable dosing equipment.
- Prepare chlorine solutions following the dosing table and instructions.
- Adjust the injection to maintain a level of chlorine that meets local regulations. In the absence of regulatory obligations, it is recommended to maintain a level of active chlorine between 1 and 3 mg/l for a pool and between 2.5 and 4 mg/l for a spa.
COMMERCIAL POOLS AND SPAS
N° UFI
UFI:9CH6-40D5-A00T-94RG
Certification
BAuA Reg.-Nr: N-76431; BAG Reg.-Nr: CHZN4265; Numer pozwolenia: 3139/07
Caution!
Application of this product is only authorised in pools that are connected to a waste water treatment plant.
Never pour water onto this product as it may react violently if it enters into contact with small volumes of water.
Store in a dry place away from direct sunlight in a well-ventilated area, at an average daily temperature that does not exceed 30°C.
The expiry date and the batch number appear on the packaging.
Never pour unused product onto the ground, into bodies of water or into pipes (sinks, toilets…) or drains.
Dispose of unused product, its packaging and any other waste in compliance with local regulations.
Use the tool (scoop or similar) provided. Do not store the tool inside the packaging.
Before working on the floating device, skimmer or feeder, make sure that it no longer contains any product.
The expiry date and the batch number appear on the packaging.
This product should never come into contact or be mixed with any other preparation, wherever this may be (bucket, feeder, skimmer, tank, etc.).
Risk mitigation measures
W przypadku uzdatniania szokowego zabieg należy przeprowadzać, kiedy żadne osoby nie kąpią się, aż do całkowitego rozpuszczenia produktu przeznaczonego do bezpośredniego stosowania w ramach zabiegów konserwacyjnych. Stosowanie tego produktu jest dozwolone tylko w basenach podłączonych do oczyszczalni ścieków.
Ingredients contributing to the classification of the product
calcium hypochlorite ;
Biocidal product:
Product-type 2: Disinfectants and algaecides not intended for direct application to humans or animals. PT2
Users: Professional
BR – Water soluble briquette
Active substance:
