HTH Spa ANTI-SCALE
Liquid
1 L
PREVENTS SCALE BUILD-UP ON SPA WALLS
Makes cleaning easier and extends the life of your spa.
Characteristics
- Non-foaming at recommended dosage
- Reduces scaling on walls, making spa cleaning easier
- Does not alter the pH of the water
Dosage
Preventative treatment = 3 capfuls per m³ of water
(when filling the spa and each time new water is added)
To prevent the formation of limescale: Switch on the filtration system and pour 3 caps of hth Spa ANTI-LIMESCALE per 1 m³ (1000 L) of water directly into the spa. Repeat this operation each time the spa is filled or when new water is added. If the water hardness (TH) is too high, accelerated scaling of the equipment and the pool may occur. Water hardness is often expressed in French degrees (f°). 1 °f = 10 mg/l. This product must be used with a hardness (TH) greater than 250 mg/l. In case of very hard water (T.H. > 300 mg/l), double the dosage.
N° UFI
UFI:DE16-2093-100P-6RC8
Certification
Danger
H318:Causes serious eye damage. H318:Causes serious eye damage.
P101:If medical advice is needed, have product container or label at hand. P102:Keep out of reach of children. P103:Read carefully and follow all instructions. P280:Wear eye protection/ face protection. P305 + P351 + P338 + P310:W PRZYPADKU DOSTANIA SIĘ DO OCZU: Ostrożnie płukać wodą przez kilka minut. Wyjąć soczewki kontaktowe, jeżeli są i można je łatwo usunąć. Nadal płukać. Natychmiast skontaktować się z OŚRODKIEM ZATRUĆ/ lekarzem.
Caution!
Keep this product in a dry, well ventilated place, at an average daily temperature not exceeding 35°C.
Never pour the product on the surface of the water in the presence of bathers.
The optimal use-by date and the batch number appear on the packaging.
DO NOT MIX WITH ANY OTHER PRODUCTS. DO NOT DILUTE BEFORE USE.
Ingredients contributing to the classification of the product
tetrasodium ethylene diamine tetraacetate ;
