Pool Maintenance
HTH ALKANAL
Powder
5 kg
RESTORES ALKALINITY (TAC)
Improves bathing comfort and Helps pH levels from fluctuating.
Our pool alkalinity increaser also protects equipment and pool surfaces.
Characteristics
- Fast disolving powder
- 100% active ingredient content
Practical:
Measuring cup
Dosage
To increase the alkalinity (TAC) by 10 mg/L, use around 170 g of product per 10 m³ of water
LE SAVIEZ-VOUS ?
If the TAC (alkalinity) of the water is too low, that is to say less than 80 mg/L, the pH is likely to have significant variations and can be unstable. It is recommended to analyse the TAC at the start of the season.
- Compatible with salt chlorination.
- Make sure that the filtration is running.
- Sprinkle the product directly into the pool onto the largest surface, in front of the inlets if there are any (take into account the direction of the wind to avoid the product entering the eyes).
- To increase alkalinity (T.A.C.) 10 mg/l, it takes approximately 170 g of product per 10 m³ of water.
- When the alkalinity (TAC) of water is too low, that is to say less than 80 mg/l, the products used in the treatment of water may cause significant variations in the pH.
- In this case, it must be increased to between 80 mg/l and 140 mg/l (buffering capacity).
- The product may take some time to dissolve, but does not pose any risk to pool surfaces.
Certification
no_haz:No hazard pictogram, no signal word, no hazard statement(s), no precautionary statement(s) required.
Caution!
Keep this product in a dry, well ventilated place, at an average daily temperature not exceeding 35°C.
Never pour the product on the surface of the water in the presence of bathers.
Never pour water onto this product as it may react violently if it enters into contact with small volumes of water.
If a measuring cup is provided, use it to dose the product but not for anything else. Replace the measuring cup, when dried, in the bucket.
The optimal use-by date and the batch number appear on the packaging.
DO NOT MIX WITH ANY OTHER PRODUCT. NEVER DISSOLVE BEFORE USE.